High temperature resistant heat insulation and preservation coating GD-1
The product adopted advanced aerospace heat insulation material, can work in the temperature from -80℃～1700℃, thermal conductivity 0.03 W/m.k, shielding radiant heat and carries heat, heat insulation ratio is over 95% , which can prevent
the radiant heat and loss. It also can keep cool to the things with low temperature and prevent the heat loss caused by heat radiant from
☆ Brushing the surface of high pipe, equipment, hearth(inside &outside), heat radiation and heat loss can be decreased.
☆ Adhesion: strong sticky, with good adhesion.
☆ Scalability: prevent expansion and contraction of base material for cool & heat, with good tensile
strength and flexibility.
☆ Environment: at room temperature, without odour at room temperature and high temperature, not
dispose, not contain harmful material composition.
☆ Stability: stead Chemical performance, not react with other material, not be affected by acid, alkali.
☆ Abrasive resistance: Ceramic particle is tight, aggrandizement solvent wear-resisting strength is 3 ~ 4 times than common steel
☆ Tenacity: It can prevent the rupture during the applying.
☆ Hardness: 6H.
☆ Anti-corrosion property :There is no chlorine ion in the coating, so can prevent or in the process of wet
chloride and sulfide in air l can’t contact the metal surface to get good anticorrosion for metal surface。
☆ Fire retard effect: non inflammable. things with the coating can be barbecued and deform and
inflammable, the surface can be protected.
☆ Shielding heat rate: 90%
☆ The coefficient of thermal conductivity: 0.03w/m.K
☆ The level of : A
☆ Anti Acid (500h):unchanged
High temperature kiln chamber, the high temperature pipe, low temperature cold storage pipeline, etc
☆ The temperature can be lowered from 1700℃ to 100℃after coating12mm GD-1.
☆ The heat loss will be not more than 30% in external surface of hearth kiln only with 6 mm of GD-1 .
☆ The surface with the coating will be smooth and reflect IR from fire, so it can decrease the loss
of absorbing heat, and the temperature will be higher , and the energy will be saved.
☆ Below zero 30 ℃, the temperature of case with 10mm GD-1 will not over 0℃.
☆ There is no chlorine ion in the coating, so can prevent or in the process of wet chloride and
sulfide in air l can’t contact the metal surface to get good anti-corrosion for metal surface also won’t lead to metal welding embrittlement.
☆ The insulation coefficients is very high, so it has good insulation effect in room temperature
and high temperature .
☆ The coating also can be fire retardant, different requirement different thickness, the things
with the coating can be barbecued and deform, the things can be protected.
Every time thickness is about 1 mm, two hours later after evaporation of water fully, then the
coating can be coated repeatedly.