High Performance Thermal Neutralizing Coating XRT-50
By applying matrix nano material, optimize the path and frequency of thermal, improve the thermal radiation of object’s surface by 15%
Wildly applied to variety of metal and glass surface
1, XRT-50 can make the macro-smooth coating surface is micro-rough morphology of nano-material element, can greatly increase the thermal radiation device’s contact with the outside world area, significantly improve the thermal radiation effects.
2, Using high-temperature doping solid solution as a composite of infrared radiation. Increases energy levels of impurities, increasing
coefficient of infrared radiation, and maintain appropriate heat stability, heat resistance, high strength, corrosion resistance,
wear resistance, and other outstanding performance. Improve overall strength and compactness of the coating.
3. Different micro-crystal structures of nano-particles, through the combination of different sorts, its physical properties have a lot of differences. The product is made of
special structure of nano-crystals, scientific combination of sort of new Nano-material, has good heat dissipation, heat elimination, cool the surface clearly.
Under normal circumstances, the surface temperature can be reduced by more than 15%.
Item parameter testing standards
Looks milky white (color adjusted according to customer requirements)
Solid content: 65% GB1725
Adhesion 0 Level GB/T1720-79
Impact strength KB 50cm
Hardness 6H GB/T6739-1996
Fineness (nm) 30 GB 1724
Viscosity (James-4 cups) s 60 GB/1723-93
Salt spray test 1000h no change ASTMB117
All internal combustion engines, engine, air conditioning, LED lamp, radiators, electric enclosures, cooling the surface you want.
To ensure the quality of painting, please carefully read the instructions for use and the products correspond to the coating
1, substrate processing
Prior to painting, removal of substrate surface oil, residual rust, oxide layer.
Recommends the use of a clear alkaline water-based cleaning agent in oil, and then flush with water NET.
Surface roughness requirements within the range 25~40 μ m.
2, mix, brushing
Proportion: main agent: curing agent =1:1 (weight ratio) (subject to the Instruction Book) When mixing,
After mixing paint valid for 4 hours, according to the construction schedule.
Thinner with special diluent.
Brush thickness: generally at around 0.1mm-0.25mm.
Tool cleaning agent for cleaning finished brushing brushing immediately after cleaning tools.
Spraying operation should be carried out as soon as possible after sand blasting derusting, generally should not exceed 8 hours.
Steel surface temperature and the ambient temperature is not lower than 10 ° c, the surface temperature should be at least
higher than the dew point 3 ° c above. When the ambient temperature is 5~10℃ time, depending on the coating surface speed,
if the table in less than 2 minutes, you can work. Construction of 5 ℃ to cannot.
4, Caution: when you accidentally get in the eyes, flush eyes with water immediately. Skin contact, wash with SOAP and water.